Shroud tension and chainplate adjustment
My shrouds seem to have a fair amount of play, to the point that a 15 mph wind will move them easily when sitting on the trailer. I consulted the manual and the chainplate assemble is set as recommended with the middle hole (out of three) on the clip lined with the second hole (out of two) on the chainplate.
The forestay seems loose also. When you tug on the forestay, there is about a half to three quarter inch draw.
I have adjusted the turnbuckle under the forward; however, this seems to have net zero effect.
I’m sure there is something I’ve missed. Any thought are greatly appreciated; is the Scot supposed to be loosely rigged?
Ron D. White